How To Repair Pentair Pool Filter Multiport Valve Diverter | Replace Rusted Spring and Rebuild Diverter Assembly | Cedar Park Pool

How To Repair Multiport Valve Diverter

Tutorial on how to replace the rusted spring and rebuild a PENTAIR multiport valve diverter on a pool filter multiport valve. These springs only last a few years max, and then most people buy a whole new multiport valve diverter top assembly, which costs at least $150, and I've heard pool stores charge as much as $450 for. These springs can be purchased for less than $5, and easily replaced with basic hand tools.

▼ WHERE TO BUY MULTIPORT SPRING

The multiport valve spring rusts out pretty quick and will prevent your multisport valve from sealing. Replacing the spring is a lot cheaper ($10-$40) vs replacing the whole multiport valve head ($150+). For this Pentair 2" multiport valve, the spring is 1-5/8in in diameter by 1-3/8in tall.

▶ Pentair 271161 Valve Spring Replacement for HiFlow Top and Side Mount Pool/Spa Multiport Valve (AMAZON)

▶ Pentair 271161 Valve Spring Replacement for HiFlow Top and Side Mount Pool/Spa Multiport Valve (POOL WAREHOUSE.COM)

▶ This HAYWARD SPX0603S spring is the same dimensions as the Pentair 2" spring, so it can also work. It's a lot less expensive than the Pentair spring.

▶ This is a 4 pack of springs for Hayward brand valves, but has the same dimensions as Pentair 2" valve spring. SPX0603S

▼ WHERE TO BUY PARTS NEEDED TO REBUILD THE MULTIPORT VALVE COVER/DIVERTER ASSEMBLY

▶ #23 - Part # 191479 - O-rings - 7/8 Inch ID x 1-1/8 Inch OD x 1/8 Inch - (2 Needed)

▶ #21 - Part # 271161 - Valve spring

▶ #24 - Part # 271160 - Washer, valve spring (not necessary to replace if old one is in good condition)

▶ #25 - Part # 271157 - Washer, handle (not necessary to replace if old one is in good condition)

▶ Pool O-Ring Lubricant

▼ WHERE TO BUY MULTIPORT TOP ASSEMBLY

The Pentair 2 inch multiport top valve assembly is part #

270067

▶ Pentair 270067 2-Inch Top Valve Assembly Replacement Hiflow Top and Side Mount Pool/Spa Multiport Valve

MULTIPORT VALVE DETAILS

The label on the top of the multiport valve says valve body part number is 261152. I believe that is incorrectly labeled, because that valve is only for DE filters (not the Triton II sans filter). The correct valve body part # for use with the Triton II sand filters is 261055. The difference is the flow direction of the valve. The top cover, handle, and diverter are the same for both variations of the valve body.

Multiport Valve Product Name

• 2" Valve Kit Multiport, Side Mount Sand Filters SM-20-3

Multiport Valve Manufacturer Part Number

• 261055

Parts needed to rebuild the Multiport Valve Cover/Diverter assembly

1. #23 - Part # 191479 - O-rings - 7/8 Inch ID x 1-1/8 Inch OD x 1/8 Inch T

2. #21 - Part # 271161 - Valve spring

3. #24 - Part # 271160 - Washer, valve spring (not necessary to replace if old one is in good condition)

4. #25 - Part # 271157 - Washer, handle (not necessary to replace if old one is in good condition)

Specifically, this information is for the Cedar Park Pool and Clubhouse.

▼ VISIT OUR WEBSITE

▶ Products we make: https://soulbuilt.us

▶ Engineering: https://www.engineerable.com

▼ FOLLOW US ON:

▶ Instagram: https://www.instagram.com/soul.built/

▶ Facebook: https://www.facebook.com/soulbuilt.us

#pool #poolrepair #poolfilter

How To Replace Spider Gasket on Pentair Pool Filter Multiport Valve | Cedar Park Pool

Affiliate Disclaimer

The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY